UPS suitable for plastic injection machine
As you know, UPS is an uninterruptible power supply. This electronic tool supplies the electric current needed by the consumer’s electric devices during a power cut, and in this regard, after re-establishing the municipal electric current, it is responsible for regulating and maintaining the electricity grid. In addition, this device prevents the penetration of noise and disturbances in equipment such as plastic injection machines. Stay with us to learn how UPS works.
Influential factors during UPS powering
Among the influencing factors during UPS powering, the following can be mentioned:
The number of systems and the amount of load connected to the UPS
The capacity of the battery used in the input UPS
UPS working method
Among the duties of UPS and how UPS works, the following can be mentioned:
Adjusting and modifying or increasing and reducing the output and input voltages, with the aim of providing an acceptable voltage for the device.
Providing electricity needed by consumer equipment with desirable quality and continuously
All this happens when the regional electricity supplier has general or partial problems.
Types of UPS
The types of these electronic tools are:
This type of UPS is activated in the circuit when the power is interrupted.
Online UPS or On line UPS
The task of this type of UPS is to transfer the correct output to the load by correcting the input voltage or stabilizing the input from noise. Therefore, the output is usually provided by these types of UPS.
Also read: How many hours does the UPS work?
Interactive UPS or Line Interactive UPS
The task of this type of UPS is to provide AC output without input disturbances, and this means, in normal times, to transfer the input to the transformer through the bypass mode. In this case, the transformer will actually control the charger.
Battery (Battery): with the purpose of storing electrical energy and using it as a source of electrical energy in ups
Inverter (Inverter): In order to convert direct current into alternating current
Charger (Charger): with the purpose of charging the UPS battery and converting alternating current to direct current
Rectifier (Rectifier): In order to convert the incoming alternating current into direct current
With these definitions, it is expected that UPS will be used in various industries and jobs. One of the most widely used fields of UPS is to equip them with plastic injection devices. In the following, we would like to further examine the use of UPS in plastic injection machines.
Plastic injection machine
Once a part is designed by an engineer or an industrial designer, a mold suitable to the part is made by the mold maker. Injection molds are usually made of steel or aluminum and are carefully machined to reflect the features of the designed part.
Injection molding is used to produce a wide range of products, from the smallest objects to the complete body of cars.
Uses of injection molding
Plastic injection molding is considered a modern and up-to-date method in the production of plastic parts. Injection molds play a very important role in the production of a wide variety of products such as home electrical appliances, containers, bottle caps, car interior components and most existing plastic products. They play an important role.
Having the ability to make multi-component parts and in fact to produce several products simultaneously during one work cycle, injection molding has become an ideal option for the production of high volume products. High accuracy, reproducibility, wide range of consumables, low labor cost, low waste and the need for low requirements to finalize the products after molding are all advantages of molding. strong>injection are considered plastic.
Also read: UPS for disposable cup production line
Among its disadvantages we can mention the high cost of the machine tool and the need for a (Prototype) (since some complex parts may be made during the process injection have problems such as warping or uneven surface). As a result, in the design of plastic injection parts, precise molding points should be considered.
Currently, with the presence of all-electric machines, the arena is getting narrower and narrower than the common hydraulic injection machines. The related companies use these machines because of the 80% saving in energy consumption and the almost 100% repeatability made possible thanks to the presence of the servo motor. They prefer common hydraulic models.
While the price of an electric injection machine is about 30% higher than a conventional hydraulic machine, the large demand for plastic products is overcoming this financial barrier. There is speculation that hydraulic injection machines will be a thing of the past in the next 20 years, because every day, due to the competitive environment, more and more companies are moving into the new world of electric machines.
If you intend to buy electrical and electronic equipment for medical and hospital centers , Medical Equipment, Homes, Departments and Organizations, Elevators and Lifts, ATMs, electric shutter, water and gas coolers, computer systems , Telecom Systems, Data Centers,Dental Equipment, Safety Equipment, Labs, Lighting Equipment and… you can contact us. Our colleagues and educated experts are willing to give any advice and answer your questions, dear buyers.
In this article, we have reviewed UPS suitable for plastic injection machines, we have explained their types and functions, so you can get the information you need by reading the said material.
Tesla is one of the most equipped and specialized UPS emergency power supply centers for customers and is ready to serve with the latest equipment.
Buyers and customers can contact us at the following phone numbers to get the necessary advice and guidance for purchasing hospital emergency power (UPS).