Which UPS is suitable for CCTV cameras?

20th, April 2021

As you know; UPS is an uninterruptible power supply. This electronic tool supplies the electric current needed by the consumer’s electric devices during a power cut, and in this regard, after re-establishing the municipal electric current, the task of is responsible for setting up and maintaining the power of the network; In addition, this device prevents the penetration of noise and disruptions in sensitive consumer equipment.

Among the influencing factors during UPS powering, the following can be mentioned:

The number of systems and the amount of load found connected to the UPS

Capacity of the used battery in the UPS input

Among the tasks of UPS and how UPS works, the following can be mentioned:

Adjusting and correcting or increasing and decreasing output and input voltages, with the aim of providing an acceptable voltage for the device

Providing the electricity needed by the consumer equipment with the desired quality and continuously

All this happens when the provider of regional electricity has general or minor problems.

Types of UPS

The types of these electronic tools are:

Offline UPS

On line UPS

UPS Interactive or Line Interactive UPS

Offline UPS or Off line UPS

This type of UPS is activated in the circuit during a power cut.

Online UPS or On line UPS

The task of this type of UPS is to transfer the correct output to the load by correcting the input voltage or stabilizing the input from noise. Therefore, the output is usually provided by these types of UPS.

Interactive UPS or Line Interactive UPS

The task of this type of UPS is to provide AC output without input disturbances, and this means that in normal cases, the input is Transfer the bypass mode to the transformer, in this mode, the transformer will act as a charger.

UPS components

Battery: with the purpose of storing electrical energy and using it as a source of electrical energy in UPS

Inverter(Inverter): In order to convert direct current into alternating current

Charger(Charger): with the purpose of charging the UPS battery and converting alternating current to direct

Rectifier: In order to convert the input alternating current to direct current

UPS for CCTV

In fact, security systems that include closed-circuit cameras, electronic fences, alarms, etc.; only when they are active and ready to work 24 hours a day, seven days a week; are considered a functional system; Therefore, it is necessary to have a UPS system for when there is a power outage; exist so that the security devices can continue to work.

Power dimensions of UPS devices used in security systems

In order to know how much power of the UPS device you need in this case; It is necessary to calculate the consumption of your security systems in according to volts and amps. For example, an 8-channel CCTV camera needs a 600 volt ampere UPS device.

when the question of using cheap UPS is raised; Most people recommend offline UPS due to the lower price, but these types of UPS are not practical at all for the purpose of 24-hour support.

The most appropriate solution for this case is to use online UPS devices, and with a little search, you can find online UPSs that have reasonable prices. /strong> or even have the same price as offline UPS.

Several important points to maintain UPS systems:

Consider the distances between your security systems and then make a decision regarding UPS devices.

Basically, security systems have their own power consumption. In the first step, measure this power and then make sure that this value does not exceed the consumable power you need.

Use UPS devices with automatic reset capability so that when the city electricity is connected; security systems can use municipal electricity again.

If your budget is sufficient; Buy a UPS device that has a higher capacity.