UPS suitable for blood gas analyzer


From Tesla UPS: UPS which stands for Uninterruptible strong > power is supply; It means an uninterrupted power source. This device is an electronic power source whose most important task is to provide the power required by the load, that too in a non-stop manner. This system is placed between the city electricity and the consumer device, and in addition to stabilizing and regulating the electricity network, it prevents the penetration of noise and network disturbances into the strong >inside /strong> sensitive consumer equipment, prevents.

In addition, as uninterruptible power sources, UPS provides the energy needed by consumer equipment with the help of energy stored in its battery. In fact, using a backup energy such as an uninterrupted energy supply system enables users to be safe from most of the problems caused by the city’s electricity.

In the past, UPS was considered an expensive system; But today, due to the expensiveness of the equipment in terms of hardware as well as their information and data, the cost of purchasing a UPS device is quite affordable.

Also read: UPS suitable for photometer devices

As you read; The most important task of a UPS device is to provide an uninterrupted source of energy for the equipment it protects; But how?
Plug is an electrical device that is connected to city electricity or to the reducer of voltage changes that is connected to city electricity; connects; It uses only one power source; In this way, when the city electricity is cut off; After the power cut, the consumer shuts down all the time;

Meanwhile, a UPS disrupts this equation by providing two power sources for that device.
UPS are designed in such a way that two energy sources are always available: the first one, the primary energy source, with the main name of city electricity, and the second source, which is cut off in time. The first source is included in the circuit, which is also called the secondary source, the battery.

UPS for Analyzer blood gas

Depending on the type of UPS, sometimes a switch is used to control which power source is used at which time. ; has been put Of course, the city’s electricity is in the form of alternating and the users’ equipment uses alternating electricity. All batteries produce direct electricity; For this reason, a part of the UPS, as a charger, is in charge of converting alternating energy into direct power for the purpose of charging batteries.

Also read: UPS suitable for electrocautery devices

In addition, another part named inverter also aims to convert the direct energy stored in the battery into alternating current, with the aim of starting users’ devices, in all of UP. s, it is placed; Therefore, the battery, charger and inverter can be mentioned as the most important parts of a UPS device.
Ups have different types and different sizes. The unit of measurement of these systems is power or VA (voltage multiplied by the output current). As much as the inverter of a UPS device is stronger; The power and strength of this system will be more.

Various UPSs, various features such as warning alarms in the event of an error or overload, computer control software for a purpose Storing information and turning off the computer and other facilities.

One of the most common fields of use of these systems is the field of medicine and hospital equipment. One of the most important of these equipments and tools is Blood Gas Analyzer.

Blood gas analyzer introduction

Blood gas analyzer is a tool to measure take the pressure of oxygencarbon dioxidecarbon monoxide strong> and nitrogen are used in the blood.
Since their invention in 1957, blood gas analyzers have revolutionized the field of medicine and patient care. In the 1960s, these devices were used almost internationally. The blood gas test determines whether the patient has enough oxygen in his blood and whether the pH of the blood is balanced. These tests measure blood pH, (2) pO amount of insoluble oxygen in the blood, (2pCO) Determine the amount of undissolved carbon dioxide in the blood and other parameters such as 2 O and 3 HCO saturation

From Tesla

If you intend to buy electrical and electronic equipment for medical and hospital centers , Medical EquipmentHomes, Departments and Organizations, Elevators and LiftsATMselectric shutter, water and gas coolers, computer systems Telecom Systems, Data Centers,Dental Equipment, Safety Equipment, Labs, Lighting Equipment and … you have, you can contact us. Our colleagues and educated experts are willing to give any advice and answer your questions, dear buyers.

UPS suitable for Blood gas analyzer

Got any questions? For technical support, please call us +982188861253 +982188312456 +989194551896 +989104609393


Your email address will not be published. Required fields are marked *