UPS for CNC machine


as you know UPS is an uninterrupted power supply. This electronic tool supplies the electric current needed by the consumer’s electric devices during a power cut, and in this regard, after re-establishing the municipal electric current, it is responsible for regulating and maintaining the electricity grid; In addition, this device prevents the penetration of noise and disturbances in equipment such as CNC machines. Join us to learn how Faretel Iranian UPS works.

Among the influencing factors during UPS powering, the following can be mentioned:

The number of systems and the amount of load connected to the UPS

The capacity of the battery used in the input UPS

UPS working method

Among the duties of UPS and how UPS works, the following can be mentioned:

Adjusting and modifying or increasing and reducing the output and input voltages, with the aim of providing an acceptable voltage for the device.

Providing electricity needed by consumer equipment with desirable quality and continuously

All this happens when the regional electricity supplier has general or partial problems.

Types of UPS

The types of these electronic tools are:

Offline UPS

On line UPS

UPS Interactive or Line Interactive UPS

This type of UPS is activated in the circuit during a power cut.

UPS for device CNC

Online UPS or On line UPS

The task of this type of UPS is to transfer the correct output to the load by correcting the input voltage or stabilizing the input from noise. Therefore, the output is usually provided by these types of UPS.

Also read: How many hours does the UPS work?

Interactive UPS or Line Interactive UPS

The task of this type of UPS is to provide AC output without input disturbances, and this means, in normal times, to transfer the input to the transformer through the bypass mode. In this case, the transformer will actually control the charger.

UPS components

Battery (Battery): with the purpose of storing electrical energy and using it as a source of electrical energy in ups

Inverter (Inverter): In order to convert direct current into alternating current

Charger (Charger): with the purpose of charging the UPS battery and converting alternating current to direct current

Rectifier (Rectifier): In order to convert the incoming alternating current into direct current

CNC machine

In fact, it is a hand-held machine that has the ability to command through codes and mathematical logic. It should be noted that in these devices, the existence of a person or the operator with the aim of monitoring the device is limited to standing and controlling the device and planning the movement of the device. It is programmed only once and after that, the device automatically repeats this task; Of course, this time without the presence of a person.

These days, things carved by CNC machine have grown rapidly in the market due to its many advantages compared to handicraft industries. CNCs are used in many industries and are capable of various tasks such as turning, cutting, drilling and engraving on most materials. such as wood, plastic, metals, glass, stone, plexiglass, etc.

UPS for device CNC

Also read: how Faratel Iranian UPS works

as as said; These CNC machines can be used in many production, industrial and artistic works due to their high diversity in their functions.

It should be noted that protecting and maintaining the accuracy of the device’s performance during work is one of the vital things in its performance. In this way, a sudden power outage during the operation of the CNC machine in some occasions causes a disturbance in the program of the machine and irreparable damages in the accuracy of the machine , and according to the heavy cost of buying and repairing CNC machines and their importance in industries, protecting the machine against power fluctuations, voltage and power outages is a vital matter, which It is important to protect UPSs suitable for CNC machines that are in charge.

From Tesla

If you intend to buy electrical and electronic equipment for medical and hospital centers , Medical EquipmentHomes, Departments and Organizations, Elevators and LiftsATMselectric shutter, water and gas coolers, computer systems Telecom Systems, Data Centers,Dental Equipment, Safety Equipment, Labs, Lighting Equipment and … you have, you can contact us. Our colleagues and educated experts are willing to give any advice and answer your questions, dear buyers.

Got any questions? For technical support, please call us +982188861253 +982188312456 +989194551896 +989104609393


Your email address will not be published. Required fields are marked *