How does UPS work? | How UPS works
as you know UPS is an uninterrupted power supply. This electronic tool supplies the electric current needed by the consumer’s electric devices during a power cut, and in this regard, after re-establishing the municipal electric current, it is responsible for regulating and maintaining the electricity grid; In addition, this device prevents the penetration of noise and disturbances in sensitive consumer equipment.
Among the influencing factors during UPS powering, the following can be mentioned:
The number of systems and the amount of load connected to the UPS
The capacity of the battery used in the input UPS
UPS working method
Among the duties of UPS and how UPS works, the following can be mentioned:
Adjusting and modifying or increasing and reducing the output and input voltages, with the aim of providing an acceptable voltage for the device.
Providing electricity needed by consumer equipment with desirable quality and continuously
All this happens when the regional electricity supplier has general or partial problems.
Types of UPS
The types of these electronic tools are:
This type of UPS is activated in the circuit during a power cut.
Online UPS or On line UPS
The task of this type of UPS is to transfer the correct output to the load by correcting the input voltage or stabilizing the input from noise. Therefore, the output is usually provided by these types of UPS.
Also read: How many hours does the UPS work?
Interactive UPS or Line Interactive UPS
The task of this type of UPS is to provide AC output without input disturbances, and this means, in normal times, to transfer the input to the transformer through the bypass mode. In this case, the transformer will actually control the charger.
Battery (Battery): with the purpose of storing electrical energy and using it as a source of electrical energy in ups
Inverter (Inverter): In order to convert direct current into alternating current
Charger ( Charger ): With the Purpose of Charging The Uppers Battery and Converting Alternating Current to Direct Current
Rectifier (Rectifier): In order to convert the incoming alternating current into direct current
From Other UPS Components that are reee-use in them; It is a Voltage Regulator or AVR Who is Installed in the Order to Prevent Electricity Fluportuations. It should be noted that the power of UPS devices can be one of the important factors in its selection. The power of an upends on ITs Inverter; so that the more powerful the inverter is; The power of the UPS device is also higher.
Amount of Energy Needed by UPS is normally supported from AC Input and Charger Using an Inverter Simultaneously Charges the Battery by Converting Alternating Current to Direct Current. IF the Electricity Input Is Interverted or has a problem; Immediately, the inverter converts the battery’s direct current into alternating current and provides uninterrupted power for the device.
If you intend to buy electrical and electronic equipment for medical and hospital centers , Medical Equipment, Homes, Departments and Organizations, Elevators and Lifts, ATMs, electric shutter, water and gas coolers, computer systems , Telecom Systems, Data Centers,Dental Equipment, Safety Equipment, Labs, Lighting Equipment and … you have, you can contact us. Our colleagues and educated experts are willing to give any advice and answer your questions, dear buyers.