Aquarium emergency power


In fact, your aquarium water gradually loses its temperature during a power outage. Of course, it should be noted that some fish strongly react to the decrease in ambient temperature.

Using pieces of foam or even wrapping the aquarium in a blanket can help keep the aquarium water stable. Never use unconventional sources such as placing the aquarium near a radiant heater to heat the aquarium water, as it is very difficult to control the temperature.

Usually the biggest problem you may have to worry about in the event of a power outage is the air filter settings. When oxygen filtration stops, the water slows down and aerobic bacteria gradually die, releasing dangerous toxins into the water. With this in mind, we advise you on how to control the condition of the aquarium.


Essential equipment that requires electricity

As you have seen, due to the dependence of the function of electrical devices and vital needs on electricity, it should be a device that can provide the required electricity immediately in case of a power outage and work temporarily until the city power outage. Certainly, there will be no more problems during power outages for devices that use electricity. An emergency power system is your solution in the event of a power outage.

In short, most of our activities depend on electrical energy and electricity, and the lack of electricity or frequent power outages can disrupt equipment that needs electricity. To solve the problem of power outages, we need a system or equipment to provide the necessary load power to devices without interruption during power outages, this system or emergency power device UPS is called. In the following, we will examine the types of emergency power, how it works, and its differences and benefits.

Concept of UPS (UPS)

UPS stands for Uninterruptible Power Supply in Farsi, which means that the power required by the devices connected to it is provided by the energy stored in the battery. It is ensured that in the event of a power cut, it provides the necessary load power for the devices without interruption.

UPS works with a battery and if the city electricity is connected, it uses it to charge the battery, and if the city electricity is cut off, it takes it out of the circuit and puts the battery in the circuit.


Functions of the UPS device

The main task of the UPS is to create a direct reliable connection during severe power fluctuations and power outages so that the electronic device connected to it does not suffer from problems and breakdowns. UPS uses two sources for its energy supply, the first source is city electricity, which are connected to each other with a plug, in this way, the required energy of the device is provided.

If the power goes out, the UPS comes into action and supplies the device with the energy it has stored in its batteries. The UPS battery is inactive under normal conditions, that is, the electrical energy of the electronic devices is supplied by the city electricity, and the UPS battery is also charged in the same way.

Types of UPS

UPS are divided into three types based on their structure and function, online UPS, Line interactive, UPS offline are divided.


Online UPS

It is with double conversion method. Online UPS continuously converts and continuously converts proportional voltage to direct voltage to charge the battery. In emergency situations, UPSs feed the output load without mechanical switching, therefore there is no delay in supplying output power, so that the delay is 30 milliseconds.

Offline UPS

Under normal conditions, an offline UPS connects the input and output through a direct electrical connection. In normal conditions, an offline UPS divides the output loads directly through the input power, and when the input voltage If it is less or more than the standard value, the UPS activates the output inverter so that the output loads are powered by the battery. The sea wave form of offline PSs is sinusoidal.

UPS High Line Interactive

Highline Interactive UPS are very similar to offline UPS and the common shape of UPS is also sinusoidal. In normal conditions, High Line Interactive UPS can adjust the voltage range through an auto-transformer, and the battery that is in the charging state establishes the input and output connection when the UPS battery power is cut off by the inverter to feed the consumer devices . he does.


In this article, we have reviewed the aquarium emergency power, we have explained their types and functions, so you can get the information you need by reading the said material.

Tesla It is one of the most equipped and specialized UPS emergency power supply centers for customers and is ready to serve with the latest equipment.

Buyers and customers can contact us at the following phone numbers to receive necessary advice and guidance for purchasing aquarium emergency power.

Got any questions? For technical support, please call us +982188861253 +982188312456 +989194551896 +989104609393


Your email address will not be published. Required fields are marked *